Testing the speaker inside a (one-half) Jesmonite Space Rock.
Videos
(Not-so) loudspeaker tests
Videos showing tests of the small, medium and large speakers I have to test, plugged into the LM386 super mini amplifier board.
Mike Ladd – Seaweed
Found this lovely audio piece (and video) while researching into memory and sound. It’s mentioned in The Memory of Sound: Preserving the Sonic Past By Seán Street.
Mike Ladd (born 1959) is an Australian poet and radio presenter.
[Another of Ladd’s works from the same series was entitled] Seaweed, [and] grew out of a chance find of a length of audio-cassette tape on a beach:
“I discovered the tape had songs recorded from the radio and children’s voices on it, and I produced the work by multi-tracking these stretched and backwards sounds and voices. Seaweed began an ongoing interest in the physical decay of audio-tape—perhaps reflecting the way sound always decays into silence, and that memory can also fade.”
XBees connected
Managed to get the XBees talking to each other, following these steps. The video shows two completely unconnnected Arduino circuits. The one on the right (coordinator) sends the reading from the potentiometer to fade the light on the board on the left (receiver).
Arduino audio – further Mozzi tests
A video showing an Arduino Nano running the Mozzi library, which allows sounds generated from sensors. This uses the LDR + resistor as input to Analog Pins A1 + A2, and using the code from Arduino➞File➞Examples➞Mozzi➞03.Sensors➞Knob_LightLevel_x2_FMsynth
And here’s the attendant audio.
Arduino audio tests
Arduino audio tests using the Mozzi library, a Nano board, a light dependent resistor and a potentiometer (volume control).
http://sensorium.github.io/Mozzi/learn/introductory-tutorial/
MagLev
Investigating magnetic levitation to suspend the Space Rock objects for display. The idea is that the objects appear to float in space, enhancing the feeling that they are ‘alien’ / from another planet.
And some examples that may be worth trying:
Nano board tests
Quite pleased to have the Nano boards I ordered working, after quite a lot of fiddling around with drivers and the various ports.
Updated Arduino random play MP3s
With excellent assistance from the Arduino forum, I now have a working version of the circuit to play a random MP3 file each time the distance sensor is triggered. It doesn’t play a few of the files when they are triggered, but this has been tested elsewhere and the code works, so I need to investigate the files themselves, it seems.
And here’s the code used.
#include <SoftwareSerial.h>
#define ARDUINO_RX 5 //should connect to TX of the Serial MP3 Player module
#define ARDUINO_TX 6 //connect to RX of the module
#define trigPin 13 //for the distance module
#define echoPin 12
SoftwareSerial mySerial(ARDUINO_RX, ARDUINO_TX);//init the serial protocol, tell to myserial wich pins are TX and RX
////////////////////////////////////////////////////////////////////////////////////
//all the commands needed in the datasheet(http://geekmatic.in.ua/pdf/Catalex_MP3_board.pdf)
uint8_t Send_buf[8] = {0} ;//The MP3 player undestands orders in a 8 int string
//0X7E FF 06 command 00 00 00 EF;(if command =01 next song order)
#define NEXT_SONG 0X01
#define PREV_SONG 0X02
#define CMD_PLAY_W_INDEX 0X03 //DATA IS REQUIRED (number of song)
#define VOLUME_UP_ONE 0X04
#define VOLUME_DOWN_ONE 0X05
#define CMD_SET_VOLUME 0X06//DATA IS REQUIRED (number of volume from 0 up to 30(0x1E))
#define SET_DAC 0X17
#define CMD_PLAY_WITHVOLUME 0X22 //data is needed 0x7E 06 22 00 xx yy EF;(xx volume)(yy number of song)
#define CMD_SEL_DEV 0X09 //SELECT STORAGE DEVICE, DATA IS REQUIRED
#define DEV_TF 0X02 //HELLO,IM THE DATA REQUIRED
#define SLEEP_MODE_START 0X0A
#define SLEEP_MODE_WAKEUP 0X0B
#define CMD_RESET 0X0C//CHIP RESET
#define CMD_PLAY 0X0D //RESUME PLAYBACK
#define CMD_PAUSE 0X0E //PLAYBACK IS PAUSED
#define CMD_PLAY_WITHFOLDER 0X0F//DATA IS NEEDED, 0x7E 06 0F 00 01 02 EF;(play the song with the directory \01\002xxxxxx.mp3
#define STOP_PLAY 0X16
#define PLAY_FOLDER 0X17// data is needed 0x7E 06 17 00 01 XX EF;(play the 01 folder)(value xx we dont care)
#define SET_CYCLEPLAY 0X19//data is needed 00 start; 01 close
#define SET_DAC 0X17//data is needed 00 start DAC OUTPUT;01 DAC no output
////////////////////////////////////////////////////////////////////////////////////
void setup() {
Serial.begin(9600); //Start our Serial coms for serial monitor in our pc
mySerial.begin(9600); //Start our Serial coms for THE MP3
delay(500); //Wait chip initialization is complete
sendCommand(CMD_SEL_DEV, DEV_TF); //select the TF card
delay(200); //wait for 200ms
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
randomSeed(analogRead(A0));
}
void loop() {
if (measureDistance(trigPin, echoPin) < 10) {
int randTrackNo;
randTrackNo = random(1, 9);
sendCommand(0x03, randTrackNo);
Serial.print("Playing track:");
Serial.println(randTrackNo);
delay(1000); //wait to avoid errors
}
delay(300);
}
void sendCommand(int8_t command, int16_t dat) {
delay(20);
Send_buf[0] = 0x7e; //starting byte
Send_buf[1] = 0xff; //version
Send_buf[2] = 0x06; //the number of bytes of the command without starting byte and ending byte
Send_buf[3] = command; //
Send_buf[4] = 0x00; //0x00 = no feedback, 0x01 = feedback
Send_buf[5] = (int8_t)(dat >> 8); //datah
Send_buf[6] = (int8_t)(dat); //datal
Send_buf[7] = 0xef; //ending byte
for (uint8_t i = 0; i < 8; i++) {
mySerial.write(Send_buf[i]) ; //send bit to serial mp3
Serial.print(Send_buf[i], HEX); //send bit to serial monitor in pc
Serial.print(" ");
}
Serial.println();
}
long measureDistance(int trigger, int echo) {
long duration, distance;
digitalWrite(trigger, LOW); //PULSE ___|---|___
delayMicroseconds(2);
digitalWrite(trigger, HIGH);
delayMicroseconds(10);
digitalWrite(trigger, LOW);
duration = pulseIn(echo, HIGH);
distance = (duration / 2) / 29.1;
Serial.print("distance: ");
Serial.println(distance);
return distance;
}
Videomapping – first experiment
Welcome to Liberty City – my first videomapping experiment, creating a ‘future cityscape’ for What Goes Around Comes Around.
Music: Special Request – Adel Crag Microdot