A series of photos showing the first attempts at casting the Space Rocks in Jesmonite, along with some further 3D printed parts to hold the circuitry and electronics.
Tag: circuits
Taking shape
The latest version of Space Rock #4, sanded and with the circuit board and powerbank holder printed for inside. Also shown is a version of Space Rock #1 printed in sections at 280mm wide, and coated with XTC 3D as a test as this print has lots of flaws – not least because the filament snapped just before finishing printing the front section, so I had to do a patch repair. Interesting to see how smooth this sands down.
Revised Space Rock circuit sketch
XBees connected
Managed to get the XBees talking to each other, following these steps. The video shows two completely unconnnected Arduino circuits. The one on the right (coordinator) sends the reading from the potentiometer to fade the light on the board on the left (receiver).
Arduino audio tests
Arduino audio tests using the Mozzi library, a Nano board, a light dependent resistor and a potentiometer (volume control).
http://sensorium.github.io/Mozzi/learn/introductory-tutorial/


























You must be logged in to post a comment.